Staples for Rabbit Jumping Obstacles
 
Klints’ own-designed staples are factory-produced and specifically developed for rabbit jumping obstacles. The staples keep the pole securely in place even in strong winds, while still allowing the pole to be easily knocked down from either direction.
 
The staples are made of stainless steel and fit poles with a diameter of 16–20 mm.
 
Dimensions: 40 × 23 mm, bend 8 mm, diameter 3 mm.
 
Installation
 
Follow the steps below for the best result.
 
 
 
Pre-drill a 3 mm hole, approximately 1–2 cm deep.
 
 
Apply glue into the hole or to the two ends of the staple.
 
 
Work the staple into place with your fingers or gently tap it in with a hammer.
 
 
If there is any excess glue around the staple or on the obstacle, simply wipe it away.